Call Us Today! 405-301-7297

Summer should be a time for pool parties, barbecues, and family fun. But it’s hard to enjoy the season if you don’t have an AC that’s working. If your AC doesn’t cool properly, you won’t have any relief from the heat. Fortunately, an air conditioning service in Moore, OK can tell you why your system is failing you and repair the issue. Typically, your HVAC system isn’t cooling because of these eight common issues. 

 

1. Air Filter is Clogged

 

If you’re lucky, this is the reason for your woes. A clogged air filter keeps the air from flowing through your system, and this limits the cooling ability of your unit. Fortunately, there’s a simple fix for this. You can change out the filter to restore the flow of air.

 

It’s better to avoid this issue than to put an unnecessary toll on your HVAC. When you first move into your home or get a new HVAC system, check the filters every month. When you notice dirt and particles on the filters, change them out. 

 

Some HVAC systems have reusable filters. Before you get to work, learn more about your filter types. Educate yourself on the proper way to clean your filters, or get the measurements for the necessary replacements. 

 

2. Dirt on the Coils

 

When your AC doesn’t seem to blow enough cold air, you could have dirty coils. The coils are located in the condenser and work similar to a radiator. By dissipating heat from the air, the coils make it possible for the AC to cool your home. 

 

For the coils to work properly, they need to be clean. Dirt on the coils prevent them from being efficient, and the air blowing into your home will be warm. To restore your cooling, you need to clean your coils.

 

Although some homeowners try to handle this job on their own, it’s challenging and potentially dangerous. Unless you have HVAC experience, you should consider hiring someone for air conditioner repair in Moore, OK. 

 

3. Low Coolant

 

 Your AC is a complex piece of machinery that needs every component to work well, or it will fail you. Often overlooked, the coolant is one of those essential components. The coolant moves through the evaporator coils and pulls out heat as air flows through. 

 

When you have low refrigerant, too much heat remains in your air. The AC can’t keep your home comfortable until you top up your coolant.

 

Once again, this isn’t a job for you to tackle. Coolant is toxic and requires the skills of an experienced HVAC technician. Furthermore, a professional could spot a coolant leak. They may need to perform a repair before refilling the coolant. 

 

4. Malfunctioning Compressor

 

If there’s one part of your AC that’s more important than another, it’s the compressor. Your compressor is like the heart of the system, so a broken compressor could be responsible for your lack of cooling.

 

To put it simply, the compressor is a motor that squeezes the coolant and moves it through the other parts of your system. If your compressor won’t start, the coolant can’t do its job.

 

There are several reasons your compressor could be broken. Although regular maintenance may prevent this issue from arising, there’s no guarantee. As your AC ages, it becomes more and more likely to fail. 

 

5. Broken Thermostat

 

The thermostat reads the temperature of the room and signals the compressor that it’s time to begin cooling. If the thermostat misreads the temperature, your AC may not cool your home when you need it to.

 

At other times, the thermostat is misplaced. If you have a thermostat next to a window or in direct sunlight, it might not know the actual temperature in your home. Make sure your HVAC technician installs your thermostat in an appropriate place. 

 

If your thermostat doesn’t work at all, you can replace it. You may be able to do this on your own or you can rely on a professional. It might be beneficial to replace your thermostat with a smart thermostat, because it gives you energy savings.

 

6. Broken Parts

 

Almost any component of your HVAC system can break down and cause trouble for you. Run capacitors, control boards, and thermistors might stop working and result in system failure. 

 

The burden of finding the broken part isn’t on your shoulders. As soon as you suspect your AC isn’t properly cooling your home, call an HVAC technician. They know how to diagnose your problem. 

 

If you have a small AC unit, it might have a remote. The air conditioner won’t kick on, but the fix is as simple as replacing the remote. Before you call an HVAC technician for your AC, check the remote. You can buy a new one online to get your air conditioner up and running. 

 

7. It’s Too Hot Out

 

While it’s true that your AC can handle a lot, it can only withstand so much beat. If the outdoor temperature is too high, your system won’t be able to keep up with your cooling needs. 

 

Even though summers can be brutal, it’s not often hot enough to cause your AC to malfunction. However, it’s a possibility you should consider. 

 

8. AC is Too Small

 

In an effort to save money on the installation of a new AC, you might choose a small system. Unfortunately, this hurts you and could cost you more in the long-term. It’s essential to choose an AC large enough for your cooling needs.

 

By working with a reputable HVAC company, you can be sure you have the right size unit for your home. They can advise you on the best type, model, and size of your new AC.

 

Do You Need an Air Conditioning Service in Moore, OK?.

If your AC doesn’t seem to be doing what it should, don’t suffer in the heat. You deserve a fully functional AC. To restore your comfort, call us at Home Comfort Solutions. We’re eager to get your air conditioner back in working order.